Kenmore Refrigerator troubleshooting can be frustrating. It may take a bit of effort to diagnose and repair, but if you don’t, you might end up spending a lot more money than necessary.
Let us help you diagnose and repair your Kenmore Refrigerator by providing a step-by-step guide below.

Related: Refrigerator Brands to Avoid
Table of Contents
- Kenmore Refrigerator Troubleshooting
- 1. Kenmore Refrigerator Not Cooling:
- 2. Kenmore Refrigerator Not Defrosting:
- 3. Refrigerator Compressor Not Starting:
- 4. Kenmore Refrigerator Making Noise:
- 5. Refrigerator Leaking Water:
- 6. Fridge Overheating Problem:
- 7. Refrigerator Not Dispensing Water:
- Final Thoughts: Kenmore Refrigerator Troubleshooting
- Steven Settles
Kenmore Refrigerator Troubleshooting
So, in this post, we’ll go over a list of the common Kenmore refrigerator problems, along with simple troubleshooting techniques.
1. Kenmore Refrigerator Not Cooling:
It may not be cooling because of any of the following reasons:
- An error in the system of the refrigerator
- A faulty thermostat
- A faulty fan motor
- Overly warm air circulating
- A damaged compressor
- An air gap between the freezer and the refrigerator
- A leaky seal in the refrigerator
These common issues can cause a Kenmore refrigerator not to cool.
2. Kenmore Refrigerator Not Defrosting:
This can happen in different ways, and you should know the causes.
If you have a refrigerator with an automatic defrost system, the defrost system is designed to defrost the refrigerator coils in your Kenmore refrigerator automatically.
But sometimes, the defrost system does not work.
There are two main causes of this problem, and the first is the system’s timer, which is the system that controls the defrost cycle.
The second cause is the defrost heater. This is the heating element that is placed in the bottom of the refrigerator and heats the coils to defrost them.
If the defrost heater is broken, it may not be able to heat the coils to defrost them.
3. Refrigerator Compressor Not Starting:
A problem with the refrigerator compressor could be the result of a mechanical or electrical issue.
If the compressor doesn’t start, you may have a bad belt, bad electrical contacts, or a loose connection on the compressor.
In order to start the refrigerator compressor, you need to make sure that the refrigerator is plugged into a good electrical source. Then, you need to turn on the refrigerator and listen for the compressor to start.
You know it’s in good working order if you can hear the compressor operating. If it isn’t, you may need to get it replaced by a qualified operator.
4. Kenmore Refrigerator Making Noise:
There are two main types of noise that Kenmore Refrigerators can make. The first one is the sound of the compressor and the second one is the noise made by the fan.
A noisy refrigerator is an indication that the refrigerator’s fan is not running properly.
The problem can be easily fixed by changing the filter of the fan, and you can purchase a new filter from the local store.
Another problem with the Kenmore refrigerator is that the noise of the compressor can be heard inside the refrigerator.
This is not an indication of a problem with the refrigerator so you may have to hire an expert to look at it.
5. Refrigerator Leaking Water:
Leaking water can occur when the seals on the door gaskets are damaged. The water then leaks through the seals and into the compartment.
Here are some tips on how to repair a leaking refrigerator:
- Check the water filter. If the filter is clogged, the water will have a brownish color. This indicates that the filter has become blocked and must be changed.
- Check the door gaskets. In brief, the gaskets are a seal that prevents water from leaking into the refrigerator. If they are damaged, then the refrigerator will leak water.
- Clean the refrigerator. This is a must. To clean your refrigerator, you should first remove all the food and liquid in the refrigerator. After that, wipe down the refrigerator with a clean cloth.
- Check the refrigerator water level. If the water level is low, it is a sign that there is a leak in the refrigerator.
6. Fridge Overheating Problem:
The problem is that the refrigerator is too hot to touch. This could be due to a defective compressor or a faulty temperature sensor. Therefore, you may need to replace one of them to fix the problem.
So, it is very important to make sure that the unit is plugged into a stable power source.
If the unit is not plugged into a stable power source, the unit will try to operate and may even cause damage to itself.
The Kenmore Refrigerator should only operate when it is plugged into a stable power source.
7. Refrigerator Not Dispensing Water:
It is due to the internal malfunction of the water pump, and it can be the problem of a water pump or a faulty control board.
Check the water level inside the refrigerator, and if the water level is low, you should take the refrigerator to the repair shop.
Check if the refrigerator is getting enough water from the tap. Also, check the pressure of the water coming out of the faucet, and if it is low, you should replace the faucet.
You may also like to troubleshoot:
Final Thoughts: Kenmore Refrigerator Troubleshooting
In our Kenmore Refrigerator troubleshooting guide, we’ve done our best to cover all of the issues. The most common problems are:
- A noisy refrigerator.
- Leaking water.
- A refrigerator that overheats.
- A refrigerator that is not dispensing water.
- A refrigerator that is not dispensing ice.
So, if you are experiencing any of these problems, then you need to take the unit to the repair shop. The good thing is that most of the problems can be easily fixed by replacing the part.
Steven Settles is a professional content writer with over 7 years of experience in writing for different niches, including brand reviews, technology, fitness, and more.
Currently, he is working as a content writer for WorstBrands, where he provides insightful reviews of different products, including home appliances, outdoor gear, fashion, and kitchen products. In his free time, Steven enjoys traveling and exploring new places.
OUR DIGITAL READOUT ON THE TEMPRATURE GOES OFF & COMES BAK ON WHEN WE OPEN THE DOOR
Ice maker not working and I replaced the ice and water filter.