Hisense TV Won’t Turn On | 12 Ways to Fix This

Hisense is one of the largest Asian television sets and consumer electronics manufacturers. However, recently, Hisense has had some quality control issues, and many of their TVs are not performing up to specifications.

And Hisense TV won’t turn on is a common problem many users face. If you face this issue, you must know that a simple solution will get your Hisense TV working like new.

When your Hisense TV doesn’t turn on, ensure the power cord is correctly installed in the back of your Hisense television. Unplug the Hisense and wait 60 seconds. Plug the Hisense back into the wall.

Hisense TV Won’t Turn On

Here, we will discuss 12 smart ways to fix your Hisense TV that won’t turn on.

Hisense TV Won't Turn On

1. Check your TV’s power cable:

It is the most common reason why people have problems with Hisense TVs. Make sure your power cable is connected properly, and if it isn’t, then connect it and test your TV.

If it still doesn’t work, then move on to the next step.

2. Check the power supply of your TV:

Another thing you can do to fix your Hisense TV that won’t turn on is to check the power supply of your TV.

Make sure it is not damaged in any way. If it is, simply replace it with another one.

You may get a replacement power supply from almost any electrical retailer, or you can order one directly from Hisense.

3. Check the ON/OFF Button:

There is a small button beneath most Hisense TVs, which controls the power to your TV. Make sure this button is set to “ON.” If not, simply push it to the “ON” position.

4. Test your connections:

Hisense TV not turning on

If your Hisense TV is still not turning on after all these steps, test your connections.

All modern electronics have an electrical system connected to the outside world via wires and cables.

These wires and cables are known as “connections.”

If there is a bad connection somewhere in the chain of events that led to your TV not turning on, then this is where you will find it.

Additionally, if your ethernet cable is damaged, it could also result in the Hisense TV WIFI problem.

5. Try another HDMI cable:

If the first HDMI cable you used does not work, try using another one. Make sure you are using an HDMI cable that is at least 1/4 inch (6 mm) in diameter.

Usually, you should only need to replace the cable if the old one is damaged or if it is very old.

If this Hisense TV problem still persists, try using an AV receiver instead of just an HDMI cord.

An AV receiver will give you much better audio and video quality than a simple HDMI cord.

6. Turn off and unplug the power cord:

Next, unplug the power cord from the back of your TV and then turn off your TV.

Leave it like this for 5-10 minutes. After this time period, plug the power cord back into your TV and then turn it back on.

This step is crucial because it will remove any static electricity that has accumulated. If there is no improvement, then do this step again.

7. Check your TV’s fuse box:

Every TV has a little metal box inside that is attached to the bottom of the TV. Inside this “fuse box” are several small fuses.

These are used to protect the rest of the electrical system inside your TV from getting too much current.

If one of these fuses is blown, replace it with a new one. A blown fuse can cause problems with your TV, and it is better to be safe than sorry.

Repairing Hisense TV not starting

8. Clean the contacts of your TV’s remote control:

Another thing you can do to fix your Hisense TV that won’t turn on is to clean the contacts of your Hisense TV remote.

This will help prevent the remotes of different devices from getting confused with each other.

To clean the contacts of your remote control, you will need a small Phillips head screwdriver and some cotton balls or a tiny amount of electronic cleaner.

9. Keep your TV in a clean and dust-free place:

One of the worst things you can do to your TV is allow it to get lots of dust and dirt. All this will do is clog up the channels, the tuner, and, eventually, the entire TV.

Keeping your TV in a clean and dust-free place will also prevent problems down the road.

10. Check your TV’s Remote Control:

Another very common reason why people have problems with their TVs is they use the wrong remote control.

Make sure you are using the right remote control for your TV. Most likely, you will find it under the TV where you can see it.

If you cannot find the remote control, ask one of your friends or family who owns a similar type of TV to borrow his/her remote control and check it out.

11. Reset Your TV:

Sometimes, a quick reset will solve the issue.

To do this, simply hold down the button on the top of your TV for about 10 seconds until you hear a beep. Then, release all the buttons immediately and let your TV reboot.

Fixing Hisense TV not turning on

12. Check the manual:

If all else fails, check your TV’s manual. Chances are, if everything else has been exhausted, the manual has not been read to the end.

If the problem is not solved by following these suggestions, read the entire manual from start to finish. This will give you every single trick your TV has up its sleeve. Remember, the manual is your friend!

However, some TV brands don’t provide a complete guide in the manual, so it is important to check the list of TV brands to avoid buying.

Hisense Smart TV screen keeps flickering.

A screen that keeps flickering is a common issue across Hisense Smart TVs. Some consumers have reported the problem and sought technical help by contacting customer service, but nothing seems to work.

Some consumers have tried to fix the issue by resetting their TV and running through the setup wizard again. However, this process does not solve the problem.

Many customers are reportedly still experiencing flickering screens after they repaired their TVs.


  • The first step in diagnosing a flickering screen is to ensure your TV is connected to an electrical outlet and turned on.
  • Then, on your remote control, press the Menu button. You should now be on your TV’s main menu.
  • After that, move your pointer around the screen till you find the Settings icon.
  • Once you’ve reached the settings menu, hit the OK button on your TV remote.
  • You should now see a list of all the available picture settings.
  • To access Picture Settings, use the UP or DOWN arrow button on your TV remote.

In addition to the usual picture settings (normal, large, small, and normal size), another option is called “Stabilize Pictures.” Select Stabilize Pictures from the available options. Now, press the OK button on your remote control to lock in the setting.

If your screen still flickers after you have followed all the steps above, then it is likely the issue is with the TV itself and not with your remote control. If the issue still persists, try again using a different power source to test the TV.

Suppose the flickering does not stop when you use a non-Hisense TV. In that case, the issue is most likely with the cable or satellite connection from your TV to your provider. You should contact your cable or satellite provider for assistance.

Hisense Smart TV screen went black

Hisense Smart TV is a smart product that delivers value to consumers with its wide range of features. This includes content streaming, ultra-high-definition 4K videos, and more.

When Hisense Smart TV screen goes black, users may feel disappointed as it limits their entertainment experience.

Here are some tips for those who have encountered this issue:

  • Make sure the TV is on the ‘Smart’ setting
  • Unplug all HDMI cables
  • Reboot the Hisense Smart TV remotely
  • Reset the display settings
  • Try a different HDMI cable or a different device plugged into your Hisense Smart TV’s HDMI port


Hopefully, after reading this guide, you will better understand what causes a Hisense TV not to turn on and how to fix this problem quickly and easily.

Remember, your Hisense TV may not be the problem. It could be the cable or satellite box or even your internet connection.

In any case, the information in this guide will help you determine the actual source of the problem.

With this knowledge, you should be able to fix the problem quickly and easily. Good Luck!

Steven Settles Author

Steven Settles is an ISCET-certified master in appliance repair. He has aced the National Appliance Service Technician Certification Exam, showcasing his exceptional diagnostic and repair skills. With an in-depth understanding of the latest repair technologies and a keen eye on evolving industry standards, Steven is a go-to expert for any appliance issue.

4 thoughts on “Hisense TV Won’t Turn On | 12 Ways to Fix This”

Leave a Comment