Fridge problems are quite common, especially for the Traulsen brand. This is because their refrigerators are very popular, and they have been around since before many people started to buy refrigerators.
So, whether you have a broken compressor or not cooling at all, we are going to give you the solutions to your problems in our Traulsen fridge troubleshooting guide.
Related: Refrigerator Brands to Avoid
Table of Contents
Traulsen Fridge Troubleshooting
If your Traulsen fridge is acting strangely, you might want to check out the following troubleshooting guide.
1. Inside is Too Warm:
Inside the refrigerator is supposed to be at the temperature you set, and if you set it too high, it will cool the inside faster.
You can solve it if it is too hot inside by doing the following:
- Reset the temperature control.
- Clean the evaporator coils.
- Use a dry cloth to wipe the evaporator coils.
- Close the refrigerator door for about 10 minutes.
- Turn the refrigerator on and see if it is too warm inside.
2. Inside is Too Cold:
It can be caused by a few things, like the compressor not working properly or the temperature switch not working. So, if you find that the fridge is too cold, then check the temperature switch first.
If it is working properly, then check the thermostat, and you may also want to check if the temperature control knob is in the right place.
3. Traulsen Refrigerator Not Cooling:
One of the first problems to check is the thermostat. This is the temperature control system for the refrigerator.
This is the essential part of your refrigerator and should be checked first. Your refrigerator won’t cool properly if you don’t have a functioning thermostat.
A faulty thermostat can be fixed by replacing it with a new one.
The thermostat should be located on the back of the refrigerator, under the refrigerator compartment door.
Check to see if the thermostat is turning and the red indicator is flashing.
4. Frosting on the Door:
If you have frosting on the door, then you can do the following:
- Verify that the door is firmly shut.
- Ensure that the refrigerator is turned on.
- Clean the frosting with a dry cloth.
5. Hinges are Broken:
If the refrigerator hinges are broken, then the refrigerator door won’t close properly.
Check if the door is closing properly. If not, then you may have to repair or replace the hinges.
6. Not Enough Air Flow:
If you find that your refrigerator is not cooling correctly, then you may need to replace the air filter.
This will ensure that the refrigerator has adequate airflow.
The air filter should be located on the back of the refrigerator.
Check to see if it is dirty or clogged, and you may clean the filter with a vacuum cleaner if it is unclean.
If it is clogged, then you can use a vacuum cleaner to clear it.
7. Refrigerator Compressor Not Working:
A refrigerator compressor is a motor that moves the ice and water around in your refrigerator.
If the compressor is not working, then you will not be able to cool the inside of the refrigerator.
To check if the compressor is working, open the refrigerator door and listen to the compressor. If you hear the compressor running, then it is working.
If you don’t hear the compressor operating, make sure it is switched on.
You can check this by pressing the compressor button. If it is on, then the compressor will be working.
Conclusion:
In this Traulsen fridge troubleshooting guide, we have compiled a list of customers’ prevalent issues while using.
If you have one of these problems, check if you have the correct service tag for your refrigerator, the door gasket is damaged, or the power cord is frayed. Also, see if there is any refrigerant leak.
In case you are still unable to troubleshoot your fridge, then you should contact the manufacturer or a qualified repair person to fix the problem.
Steven Settles is an ISCET-certified master in appliance repair. He has aced the National Appliance Service Technician Certification Exam, showcasing his exceptional diagnostic and repair skills. With an in-depth understanding of the latest repair technologies and a keen eye on evolving industry standards, Steven is a go-to expert for any appliance issue.