Samsung TV volume not working is a common dilemma that many people are facing. There are various reasons why it could happen, but the solution to this problem is fixable in most cases.
If your Samsung TV volume stuck or not working, you need to reset the Smart Hub on your TV.
To reset the Hub on your Samsung Smart TV follow the below steps:
Look under the Settings menu on your remote and scroll down to click the Support > Self Diagnosis > Reset Smart Hub.” Use the default PIN of “0000” to get this done.
Reset will take about 30 seconds and your TV’s volume should be back to full strength.
Is the volume on your Samsung TV still not working? No worries. Keep reading this article till the end to find out all the reasons for this problem.
Without further ado, check out the following common causes and their Solutions.
Table of Contents
- Samsung TV Volume Stuck / Not Working
- 1. Check Volume or Mute Settings
- 2. Adjust The Audio Settings on Your External Speaker
- 3. My Samsung TV Keeps Turning Volume Up
- 4. My Samsung TV Volume Too Low
- 5. TV Has No Sound
- 6. Samsung TV Volume going Too High
- 7. My Samsung TV Volume Keeps Muting
- 8. TV Volume Display Not Showing
- 9. My Samsung TV Volume Won’t Mute
- How to Adjust Volume on Samsung TV Without Remote?
- Conclusion: Samsung TV Volume Stuck / Not Working
Samsung TV Volume Stuck / Not Working
This section discusses troubleshooting options that can help resolve the issue if your Samsung TV Volume is stuck.
1. Check Volume or Mute Settings
Volume is a vital aspect of TV watching. It makes it easier for users to enjoy their content and also helps them understand the story more easily.
However, when you have a Samsung Smart TV, you might encounter a problem where the volume settings on your TV are not behaving as they should be.
The problem may be due to a faulty remote control, wrong input setting, or playing content through a Bluetooth speaker.
So firstly, let’s check the volume setting on the TV and make sure that they are set properly:
- Press the “Home” button on your remote control.
- Press the “TV/Mute” button
- Use up/down arrows to change the volume level
- Use left/right arrows to switch between “High.”
If this does not work, check your TV’s settings and select the correct input source. In a TV with built-in speakers, make sure that they are turned on in the settings menu.
However, if all of these steps fail to fix it, try connecting your blue tooth speaker to your TV and set it as an audio output device to play audio through it.
2. Adjust The Audio Settings on Your External Speaker
The volume on your Samsung TV might not be working if the external speaker is set to the wrong input. To fix this, go to the external speaker settings and change it to the right input for optimal volume levels.
One of the most common problems with Samsung TVs is that they don’t have an external audio input jack. This means that you cannot connect an external audio device to it like a smart speaker or a soundbar.
If this is the case for your TV, you will need to change the settings for it to listen in on its built-in speakers.
Samsung TVs have two ways by which you can listen: through their digital optical output and through their digital coaxial output. These are both found on the back of the TV and are usually labeled as “DOLBY DIGITAL” or “HDMI OUTPUT”
3. My Samsung TV Keeps Turning Volume Up
The first thing that you need to do is unplug the TV from its power source and then plug it back in. Sometimes, this will fix the issue for a little while and solve any problems for now.
In a lot of cases, these issues are caused by an electrical surge or malfunction within the device itself. It could be as simple as something grounding itself on an aluminum part of the device or even that some dust has built upon an internal component.
If these things do not work, you can reset the audio settings on your device or call Samsung customer service.
4. My Samsung TV Volume Too Low
You can set the TV to increase or decrease the volume depending on the content you are watching.
This is a feature called Auto Volume Leveler. If this feature is turned off, it may cause your TV to turn up and down too quickly or randomly.
You can change this setting by following these steps: – Go into Settings>Audio>Audio Format.
But if the volume is still low, then here are some simple fixes that might help resolve the issue.
- First, make sure that the audio is set to “on” and not “off.”
- Second, if your TV has 3D capabilities, try turning them off.
- If your TV is connected to an external device like a sound bar or stereo system, make sure it is connected properly and turned on.
- Make sure there is not a clog in the cable. Try using a soft brush to clean the inside of the wire.
- Check if you have any interference from other devices that may be connected.
- Lastly, if none of these solutions work, try unplugging your device from power for 15 minutes and then plug it back in. If you still have problems with the volume, try resetting your TV.
5. TV Has No Sound
Sound on Samsung TVs can be very frustrating, as you may have gone through the trouble of setting up your TV only to find out that it is defective and doesn’t have any sound at all.
Some of the problems that may cause a TV sound distortion are:
- Audio input is not connected to the TV
- Sound output is too low
- The TV volume is set too low
- The Digital signal is out of range.
So, to troubleshoot the No Sound problem, check out the following steps.
- If your TV gives no response when you press the volume buttons, first check if any red or orange lights are on its front panel. If there are no lights present, you will likely need to replace the power supply unit (PSU).
- Your TV may have been damaged due to water or dust. In this case, you would want to fix the problem quickly to avoid any further issues.
- Also, check to see if the volume is on and set correctly.
- If the problem still exists, then you need to contact the Samsung Service center.
6. Samsung TV Volume going Too High
If the TV volume is too loud or your Samsung TV volume is going too high, there are a few things you can do.
- You could adjust the volume of your TV manually, which might be time-consuming and inconvenient.
- You could search for the specific Samsung TV model’s user manual and follow its instructions on how to adjust the volume.
- Or you can use a third party app like SimpleTune to fix any problems with your Samsung TV volume automatically.
- Turn off the TV and back on if volume persists through the power cycle.
- Try unplugging all speakers from the TV so that volume will go down to 0 dB.
- Make sure all cables are plugged in tightly and not loose or disconnected from the wall outlet.
7. My Samsung TV Volume Keeps Muting
The Samsung TV Volume Keeps Muting is another common issue. When the volume suddenly turns off, it might be because of a software glitch.
Before taking your TV to the service center, try to troubleshoot this first by following these steps:
- Check if the sound is muted on your device or not. Sign in to your TV and open up its settings menu. In there, you can find out which device is currently playing sounds on the TV speakers. If it’s not one of those devices, then it means there’s always something playing sounds on the TV speakers, and that’s why they’re turning off automatically.
- Make sure that your cable or satellite box isn’t turned off when you want to watch something on Netflix or Hulu Plus.
- Also, make sure that the TV volume is not mute from the power button on the remote control
- Check if you have any speakers plugged in. If so, unplug them and see if the problem persists.
- Check if there are any external speakers connected through the line in on your TV’s back panel that may cause a feedback loop that mutes the volume.
The Samsung TV Volume Keeps Muting is an issue that has been plaguing many Samsung Smart TVs. This issue comes with a number of other symptoms, such as audio distortion, volume not working, and more.
If the problem still persists, you need to take your TV to the Samsung Service Center.
8. TV Volume Display Not Showing
This problem is often caused by an Electrolytic Capacitor (E-Cap). If this capacitor is defective, your television won’t show the volume level.
The E-Cap regulates the flow of electricity to other components in your TV. It’s typically located on the circuit board behind the power supply. The capacitor is a charged device that saves electrical energy when you need it the most, such as when you are watching a movie with Dolby Digital surround sound.
When there is a voltage drop in the circuit, the E-Cap will release and discharge electricity to make up for it.
If this doesn’t fix your issue, then you will need to replace this component. To replace it, please make sure that the new component is compatible with your current setup.
9. My Samsung TV Volume Won’t Mute
If your Samsung TV volume won’t mute when you press the button on your remote control, try these solutions:
- Ensure that you are pressing the button for at least 3 seconds.
- Replace the batteries in your remote control and try again.
- Check if something is blocking infrared signals from reaching your remote control and try again.
- Try another power outlet that is near your Samsung TV.
Here is our complete guide on how to fix Samsung TV Not Connecting To WiFi
How to Adjust Volume on Samsung TV Without Remote?
If you’ve recently purchased a Samsung TV, you might be wondering how to adjust the volume on the TV without a remote control. Luckily, there is a simple way to make an adjustment without a remote.
What is needed to do this?
- A Samsung TV with Smart Hub installed.
- One of the built-in microphones on your TV (most TVs have one).
- A laptop or PC with Smart Hub installed (PCs can also have one built in microphone).
You can also try out the following:
- Press the mute button in front of the TV and hold it for a few seconds until you hear a double beep sound. Release the mute button when you hear that sound, and your TV’s volume will go up or down by one level, depending on your preference.
- Find the volume button on either side of the TV, near where you would usually place your remote control, and press that button to increase or decrease your volume levels accordingly.
Some other TV problems you may want to fix
Conclusion: Samsung TV Volume Stuck / Not Working
It is a common problem for many people to experience Volume issues with their Samsung TVs. Sometimes the volume does not work, while sometimes, the sound is distorted or doesn’t work at all.
Samsung has provided some troubleshooting steps for their TV users to try and fix Samsung TV volume stuck issues.
To fix volume issues, first, make sure a connection exists between the TV’s optical cable and receiver with a different device such as an amplifier or another Samsung TV.
If that doesn’t work, try swapping HDMI cables between the devices until you find one that works properly.