Whirlpool washers are known for their reliability and efficiency. However, a common issue that many users face is the Whirlpool washer shaking violently during the spin cycle.
This can be alarming and lead to other Whirlpool washing machine problems if not addressed promptly.
To stop a Whirlpool washer from shaking violently, balance the load, inspect and replace damaged suspension kits, shock absorbers, and snubber rings, and remove shipping bolts.
In this guide, we will delve into the common causes of this issue and provide comprehensive and practical solutions to fix it.

Table of Contents
- How to Repair Your Whirlpool Washer Shaking Violently on Spin Cycle?
- Unbalanced Washer
- Damaged Suspension Kit
- Faulty Shock Absorber
- Worn-out Snubber Ring
- Shipping Bolts Not Removed
- Which Whirlpool Models Often Shake During Spin Cycle?
- Whirlpool Top Load Washer
- Whirlpool Duet
- Whirlpool Stackable Front Load Washer
- Final Words
- Crystal Hafley
How to Repair Your Whirlpool Washer Shaking Violently on Spin Cycle?
There could be numerous reasons for a washer to shake continuously.
We’ve picked the most common causes of why your Whirlpool washing machine would shake. We’ll also share some easy fixes for these issues.
However, first check out the table below, which summarizes all the potential causes of washer shaking and their quick repair.
Common Cause | Quick Fix |
---|---|
Unbalanced Washer | Adjust leveling feet, redistribute clothes, and remove excess items. |
Damaged Suspension Kit | Disconnect power, inspect, and replace the damaged snubber ring. |
Faulty Shock Absorber | Disconnect power, check, and replace the damaged snubber ring. |
Worn-out Snubber Ring | Remove the power plug, and inspect and replace the damaged shock absorbers. |
Shipping Bolts Not Removed | Remove all shipping bolts and run a test cycle. |
Unbalanced Washer
An unbalanced washer is a frequent culprit behind the Whirlpool washer vibrating during the spin cycle. It also causes the Whirlpool washer to keep pausing issue.
To ensure your Whirlpool washer is balanced, inspect the leveling feet and adjust them if required.
Confirming that the load inside the washer is uniformly distributed is also crucial.
The washer may become imbalanced if the clothes are collected unevenly or are heavier on one side.
To equalize the weight, consider redistributing the clothing and even deleting certain things.
It’s always better to wash a balanced load to prevent excessive vibrations and prolong the life of your washer.
Damaged Suspension Kit
The washer’s shock absorber is the suspension kit, which consists of suspension rods and springs.
A damaged suspension kit can lead to violent shaking during the spin cycle.
Cut the power and open the washer’s front panel to address this issue. Inspect the suspension rods and springs for any signs of wear or damage.
If you find any, you will need to replace the suspension kit or tighten any loose connections that you may come across.
Regular inspection of the suspension kit is essential for the long-term health of your washer.

Faulty Shock Absorber
Shock absorbers are essential to your Whirlpool washer as they absorb the force generated during the spin cycle.
When damaged or broken, the washer will start to shake aggressively, potentially leading to further damage.
If you want to replace the faulty shock absorbers, disconnect the washer from the power source first.
Then, dismantle the front panel and carefully examine the shock absorbers for any signs of damage.
If you find any, replace them with new ones. This is a crucial step in maintaining the smooth operation of your washer.
Worn-out Snubber Ring
Snubber rings are essential for dampening vibrations during the spin cycle.
A worn-out snubber ring will result in the washer base and tub connecting more directly, leading to the Whirlpool washer shaking.
First, unplug the washer from the power source to replace a worn-out snubber ring.
Next, remove the access panel and locate the snubber ring. Inspect it carefully for any signs of wear or damage.
If it is indeed worn out, replace it with a new one. Regular inspection and replacement of the snubber ring are crucial for maintaining the stability of your washer during operation.
Shipping Bolts Not Removed
When the washer is fitted, the shipping bolts used to secure the washer drum during shipment must be removed.
Failing to remove these bolts can cause the washer to shake violently during operation. Check the back of your washer and ensure that all shipping bolts have been removed.
If any are still in place, remove them and run a test cycle to see if this resolves the issue.
This is a common mistake that many people make when installing a new washer.

Similar Blog:
Which Whirlpool Models Often Shake During Spin Cycle?
Whirlpool is a renowned brand known for producing high-quality appliances.
On the other hand, some specific washer models or model series have garnered a reputation for shaking violently during the spin cycle.
Let’s take a closer look at these models:
Whirlpool Top Load Washer
This model is designed to provide a thorough and efficient cleaning, featuring large-capacity wash tubs and Adaptive Wash technology.
On the flip side, it has a high rate of consumer complaints regarding its shaky operation.
The Adaptive Wash technology is supposed to adapt the wash actions and temperature according to the load.
However, sometimes the washer can get unbalanced, leading to violent shaking.
Distributing the clothes evenly and not overloading the washer is advisable to minimize this issue.
Whirlpool Duet
This is a large-capacity front-load washer that offers both convenience and efficiency.
It is designed to handle a lot of laundry, making it a popular choice among large families.
However, Whirlpool Duet is known to shake aggressively during the spin cycle, which can concern users.
Some users have found that placing anti-vibration pads underneath the washer can help reduce the shaking.
We would suggest getting a professional to inspect the washer if the problem persists.
Whirlpool Stackable Front Load Washer
This model provides intuitive controls and a large stainless steel washtub, making it a favorite among those with limited space.
However, it could vibrate violently and loudly if the stacking kit isn’t properly installed.
Following the installation instructions carefully is crucial, ensuring the washer and dryer are perfectly aligned and securely fastened with the stacking kit.
If you are unsure about the installation, it is always better to seek professional assistance.
Final Words
A noisy, shaky Whirlpool washer can be exceedingly hard to tolerate, especially if you value peaceful and quiet spaces.
However, you still need clean clothes, and ignoring your loud vibrating washer could lead to more severe complications.
Therefore, you should try the abovementioned guidelines to stop your Whirlpool washer from shaking violently on a spin cycle.
These fixes are cost-friendly and shouldn’t take too long to effect.
If your Whirlpool washer is still shaking, you should repair it yourself or get help from a skilled technician.

Crystal Hafley is a dedicated writer and content creator for WorstBrands, where she specializes in writing insightful reviews about kitchen appliances and fashion products.
With her expertise, Crystal provides readers with accurate and reliable information to help them make informed decisions about the brands and products they use every day. When she's not researching or writing, Crystal enjoys cooking and exploring the latest fashion trends.