Electrolux dishwashers have cemented their position in many households because of their top-tier performance and reliability.
However, even the best brands like Electrolux, Samsung, and Frigidaire dishwashers can malfunction sometimes.
If your Electrolux dishwasher has been having a tough time lately, you’ve come to the right place.
I’ve prepared a comprehensive guide on Electrolux dishwasher troubleshooting to help you identify and rectify some common issues.
The most common Electrolux dishwasher problems are clogged drains, water supply issues, faulty heating elements, poor cleaning performance, unusual noises, and control board failures.
Table of Contents
Electrolux Dishwasher Troubleshooting
If you’ve faced Electrolux dishwasher malfunctions, understanding the root causes can help you solve them effectively. Let’s dive into some prevalent issues and their solutions.
1. Electrolux Dishwasher Not Draining
One of the most common issues users face is Electrolux dishwashers not draining.
Food particles, grease, and mineral deposits from hard water can build up over time and clog the filters, hoses, and pipes that fill and drain water from the dishwasher.
Signs of a blocked drain or fill path include the dishwasher not filling properly, weak or no water flow, water pooling in the bottom, and error codes.
How to Fix:
Fixing a blocked drain or fill path is relatively straightforward. First, shut off and disconnect the dishwasher from the water supply.
Then, remove and thoroughly clean the drain filters, inlet hoses, and any accessible pipes. Use a toothbrush or other small brush to dislodge stubborn buildup.
Be sure also to check and clean the small flow filter where the inlet hose connects to the dishwasher.
Reattach all the hoses and filters, then test run the dishwasher to ensure proper water flow. You may need to repeat the process if clogs persist.
Using a dishwasher cleaner monthly can help prevent future clogs by dissolving grease and lime scale.
Check out our blog on how to fix the Electrolux dishwasher not starting, which is another prevalent issue in this brand.
2. Water Not Heating
If your Electrolux dishwasher isn’t heating water, the issue is likely with the heating element, temperature sensors, or control board.
Power surges are a common cause of failure in dishwasher heating systems.
You’ll notice the Electrolux dishwasher runs, but dishes remain dirty from washing with cold water. Error codes related to water temperature may also appear.
How to Fix:
Start troubleshooting the Electrolux dishwasher by checking the heating element and its connections for any damage.
Test the heating element, sensors, and control board for continuity. If faulty, they will need replacement by a technician.
Make sure your home’s electrical system is stable. Install a surge protector if needed. Replace any burned-out fuses.
If possible, keep the dishwasher on a dedicated circuit separate from other major appliances.
3. Poor Washing Performance
When your Electrolux dishwasher fails to clean dishes properly, the cause is typically either restricted water flow or low detergent levels.
Clogged filters or supply issues restrict water from entering the dishwasher.
Detergent problems occur when the dispenser fails to open or detergent is obstructed from properly circulating during the wash cycle.
This issue is not unique to Electrolux. You can see these problems in Midea dishwashers, too.
How to Fix:
Check that water is supplied to the dishwasher and inlet filters/valves are clear.
Clean out the detergent dispenser trays of any blockage. Run the dishwasher empty with reliable dishwasher cleaner or vinegar to purge any remaining debris.
Ensure you’re using high-quality, fresh detergent and adding the appropriate amount based on load size.
Scrape food debris off dishes before washing. Use rinse aid to optimize drying performance.
4. Unusual Noise
Strange noises like grinding, knocking, or squealing point to a problem with the internal workings of the dishwasher.
Issues with the pump, motor, bearings, distribution arms, or drain system components are common culprits.
If you’ve ever looked into Kelvinator dishwasher troubleshooting, you’ll see some overlapping concerns.
How to Fix:
Isolate where the noise is coming from within the appliance. Remove bottom panels to access internal parts. Inspect the pump, motor, and moving parts like the wash arms.
Check for obstructions in the drain impeller. Lubricate parts with dishwasher-safe silicone spray if needed.
Replace damaged or worn components. Tighten loose mounting brackets and hardware. Adjust the legs to level the dishwasher to prevent vibrations.
Sound-dampening insulation strips can help muffle noise. Replace aging or failing motors.
Conclusion
Troubleshooting your Electrolux dishwasher doesn’t have to be a frustrating process.
With some basic mechanical skills and the troubleshooting tips outlined here, you can diagnose and fix many common Electrolux dishwasher problems independently.
Investigating issues like blocked drains, water supply problems, poor cleaning, and unusual noises will help you get to the root of the problem.
Simple repairs like cleaning filters and hoses, replacing parts like heating elements and pumps, and adjusting dishwasher installation can restore your appliance’s performance.
For more complex repairs, rely on authorized Electrolux technicians to correctly identify issues and make professional repairs.
But for many problems, you can save the headache and expense of a service call with DIY troubleshooting.
Steven Settles is an ISCET-certified master in appliance repair. He has aced the National Appliance Service Technician Certification Exam, showcasing his exceptional diagnostic and repair skills. With an in-depth understanding of the latest repair technologies and a keen eye on evolving industry standards, Steven is a go-to expert for any appliance issue.