Air Fryer Fan Not Working? Fix It Now!

Having issues with your air fryer fan not working properly? Don’t worry; we are here to fix the issue with simple troubleshooting tips.

An air fryer relies on the fan circulating hot air to cook food quickly and evenly, so a non-working fan will stop your air fryer dead in its tracks.

Many users faced this issue, especially malfunctioning Gourmia air fryer fans.

Pro Tip: Fix your air fryer fan stopped working by cleaning debris, tightening loose parts, replacing fuses, inspecting blades, ensuring ventilation, and replacing faulty motors.

Why Your Air Fryer Fan Won’t Work?

There are several potential reasons why your air fryer fan isn’t spinning and circulating air like it should:

Dirt, Grease, or Debris Buildup

Over time, dirt, oil, grease, and food debris can accumulate on the fan blades and prevent the fan from spinning properly.

This buildup throws off the balance of the fan and stops it from rotating smoothly. Make sure to clean the fan blades regularly to prevent this issue.

Loose Parts

Vibration from normal use can cause screws, capacitors, or other internal parts to become loose over time.

If the fan is rattling loudly or making abnormal noises, it’s likely a loose component interfering with the fan’s operation. Tighten any loose screws or connections.

Faulty Fan Motor

The motor that powers the fan itself could be broken. The fan motor may need replacing if you smell burning plastic or electronics.

Call the manufacturer to see if the motor is still under warranty.

Obstructed Fan Blades

If something falls into the air fryer, like a utensil or food crumbs, it can block the fan blades from spinning. Carefully remove any obstructions with tweezers or compressed air.

Damaged Fan Blades

The thin metal fan blades inside the air fryer can get bent or damaged over time, throwing off the balance of the fan.

If the blades are visibly damaged, the entire fan may need replacement.

Overheated Air Fryer

Using the air fryer continuously on high heat settings can cause the fan motor to overheat and fail. Let the appliance fully cool down before troubleshooting fan issues.

Problematic Safety Switch

Many air fryers have auto shut-off switches that can accidentally get triggered and cut power to the fan.

Troubleshooting Air Fryer Fan Not Working

Now that we know the common reasons, let’s start troubleshooting the air fryer fan that stopped working.

Luckily, most air fryer fan issues can be fixed with some DIY tips.

However, sometimes, users face issues with the air fryer’s touch screen, which might need a different set of troubleshooting.

1. Clean the Fan and Interior Thoroughly

Clean built-up grease and food debris off the fan blades using a small brush, compressed air, or a soft cloth. Remove the fan if possible to clean all surfaces.

Use a vacuum to clean the heating element coils and other hard-to-reach nooks where debris collects.

A deep clean removes any obstructions that stop the fan from spinning smoothly.

2. Check for Loose Parts and Connections

Open up the air fryer and inspect the internal components. Ensure no parts like capacitors, wires, or fan blades are loose.

Tighten any loose screws on the fan, circuit board, or housing. Also, check that wiring connections are still secure. Loose parts can vibrate and prevent smooth fan operation.

3. Reset or Replace Safety Features

Try locating and resetting this safety switch first. A small button or lever may need to be pressed to reboot the safety feature and restart the fan.

Check your air fryer manual for the exact location and reset procedure.

If resetting the safety switch does not work, the issue may be a blown thermal fuse.

Thermal fuses help prevent overheating and failure by cutting power if the air fryer gets too hot internally.

Check for continuity across the fuse with a multimeter. No continuity means the fuse has blown and needs replacement.

When replacing a thermal fuse, get the proper voltage and amperage rating for your particular model.

Additionally, take care when disconnecting and reconnecting wires to install the new fuse.

Sometimes, the safety switch itself may be defective and need replacing.

If the switch is triggering too easily and cutting power to the fan motor, replacement is the best solution for restoring normal function.

Troubleshooting and replacing blown fuses or faulty safety switches take some electrical knowledge, but it is necessary to get the air fryer fan running again.

Take the proper safety precautions and follow fuse or switch replacement instructions precisely.

4. Inspect Fan Blades for Damage

The thin metal fan blades inside the fryer can sometimes get bent or warped, stopping the air fryer fan.

Carefully inspect the blades for any visible damage. Straighten slightly bent blades or replace the entire fan if the blades are too deformed.

5. Let the Overheated Motor Cool Down

Using the air fryer at max settings for long periods can overheat the fan motor and cause failure.

Unplug and let the fryer cool down for several hours before attempting to restart the fan. Give the motor a chance to reset before further troubleshooting.

6. Ensure Clear Air Flow to the Motor

Check that the exterior vents are not blocked by walls, cabinets, or other objects restricting airflow.

Also, inspect the interior fan housing and air channels for debris, grease buildup, or blockages preventing air from circulating.

If the air fryer is pushed up against a wall or surface, move it several inches away to allow proper ventilation. Give the fan motor sufficient breathing room on all sides.

Ensure any vent holes on the housing are not obstructed by food crumbs or other debris. Use a flashlight to look for any buildup or obstructions.

You can use compressed air or a vacuum crevice tool to clear out any dust, dirt, or grease clogging the interior air channels or vents.

Cleaning the fan housing is key to ensuring unrestricted airflow to the motor.

Proper ventilation prevents the motor from overheating or shutting down while operating.

With open and clean vents, the fan can get the air circulation it needs to function properly for cooking and fixing your air fryer fan stopped working issue.

7. Replace a Faulty Fan or Motor

If cleaning and troubleshooting do not work, the fan motor itself may need replacing.

You likely need a replacement part installed for air fryer fan motors that won’t start.

Check your warranty status before purchasing replacement parts. Follow disassembly instructions carefully.

Summing Up

With some basic troubleshooting and DIY repair, you can often get your air fryer fan spinning again without needing expensive professional service.

The key is to methodically inspect the fan assembly, clean away any debris, and ensure no parts are loose or damaged.

Don’t hesitate to pull out your multimeter and get reading continuity to test components.

Replacing a simple fuse or motor may be all that’s needed to get your air fryer cooking once more.

Should issues persist even after a thorough troubleshooting, then replacement of the fan or motor may be required.

Be sure to check warranty coverage first. Call the professional if you are not sure at any stage.

With the right replacement part installed and everything tightened back up, you’ll be air-frying crispy veggies and juicy meats in no time again.

Just be diligent about regular cleaning and maintenance to prevent repeat fan failure down the road.

Paying attention to airflow and not overtaxing the appliance will also help avoid frustrating problems with your air fryer fan not working in the future.

Steven Settles

Steven Settles is an ISCET-certified master in appliance repair. He has aced the National Appliance Service Technician Certification Exam, showcasing his exceptional diagnostic and repair skills. With an in-depth understanding of the latest repair technologies and a keen eye on evolving industry standards, Steven is a go-to expert for any appliance issue.