Dealing with a Hotpoint washer not draining can be frustrating. It’s a common issue that many Hotpoint washing machine owners face at some point.
Not only does it mean your clothes won’t be properly cleaned, but water build-up can damage your machine.
This comprehensive guide will help you diagnose and fix the draining issues with your Hotpoint washer.
Table of Contents
- 11 Ways to Fix Hotpoint Washers Won’t Drain Problem
- 1. Perform a Master Reset
- 2. Defective Drain Pump
- 3. Faulty Door Lock Motor and Switch Assembly
- 4. Damaged Drive Belt
- 5. Clogged Drain Pump or Hose
- 6. Defective Lid Switch Assembly
- 7. Damaged Drive Belt
- 8. Loose Water Pump Belt
- 9. Blocked Coin Trap
- 10. ‘Crease Care’ or ‘Rinse Hold’ Setting Selected
- 11. Faulty Door Lock
- 4 Tips to Prevent Hotpoint Washer Not Draining Issues
- Select the Correct Setting
- Use a Laundry Bag for Small Items
- Regularly Clean the Coin Trap
- Seek Professional Help
- Final Words
- Crystal Hafley
11 Ways to Fix Hotpoint Washers Won’t Drain Problem
When you discover a soggy load of laundry and water at the bottom of the drum, it’s crucial to identify the root cause of the problem.
For the Hotpoint washer not draining, check for the clogged pump, hose, or faulty door lock. Regularly clean coin traps & use laundry bags for small items.
Let’s talk about the most common reasons in detail. Additionally, I’ll provide tips on how to fix the issues easily.
You can also check our detailed guide on common problems with Hotpoint Washing Machines and how to troubleshoot them.
1. Perform a Master Reset
Sometimes, the electronic computer inside your machine gets scrambled, affecting its draining capability.
To fix this, unplug the machine for at least one minute, then plug it back in and open and close the door six times quickly within twelve seconds.
This action will reboot the computer and may resolve any programming glitches.
2. Defective Drain Pump
The drain pump is responsible for removing water from the washer tub. The washer won’t drain properly if it’s defective or clogged with lint or other debris.
Easy Fix:
Unplug the washer and remove the access panel to locate the drain pump. Check for any obstructions.
If the pump is clear, try running the washer again. If the problem persists, you may need to replace the drain pump.
3. Faulty Door Lock Motor and Switch Assembly
This part locks the washer door and helps keep water inside the tub from draining out. If it fails, the washer won’t operate properly. The faulty door can also make the Hotpoint washer not spin properly.
Easy Fix:
Purchase a new Hotpoint washer door lock motor and switch assembly from your local Hotpoint dealer and replace the faulty one.
4. Damaged Drive Belt
The drive belt helps rotate the drum. If it’s damaged or broken, the washer may stop draining properly.
Easy Fix:
The drive belt is located at the washer’s underside. If it looks worn out or damaged, get a new one and install it according to the manufacturer’s guidelines.
5. Clogged Drain Pump or Hose
Check if the outlet hose on your machine is twisted or blocked. Move the machine a little away from the outlet and examine the hose.
Easy Fix:
Straighten the hose if any kinks or bends prevent water flow. Additionally, loosen the hose and check the inside for any blockages.
6. Defective Lid Switch Assembly
The lid switch assembly prevents the washer from spinning when the lid is open. If it’s defective, your Hotpoint washing machine won’t drain.
Easy Fix:
Open the top of your washing machine and check the indicator light. If it does not come on, the lid switch assembly is likely defective and needs to be replaced.
7. Damaged Drive Belt
The drive belt helps rotate the drum. If it’s damaged or broken, the washer may stop draining properly.
Easy Fix:
Locate the drive belt on the underside of the washer and replace it with a new one.
8. Loose Water Pump Belt
If the water pump belt is loose, it can cause the washer not to drain properly.
Easy Fix:
Tighten the belt or replace it if necessary.
9. Blocked Coin Trap
Yes, your Hotpoint washer comes with a coin trap, a nifty feature to catch stray objects. But sometimes, it catches more than it should.
Easy Fix:
Unplug the washer, remove the screws holding the coin trap in place, and lift it out. Remove any objects blocking the pump, clean out any debris, and replace the coin trap.
10. ‘Crease Care’ or ‘Rinse Hold’ Setting Selected
These settings are designed to keep water in the drum or use a lower spin speed. Useful for some cases, but not when you need the tub to drain.
Easy Fix:
Switch off these settings and run a new cycle to check for proper drainage.
11. Faulty Door Lock
Sometimes, the washer door lock can be defective, preventing the cycle from starting.
Easy Fix:
Replace the door lock assembly to ensure the machine functions as it should.
4 Tips to Prevent Hotpoint Washer Not Draining Issues
To ensure you do not face a Hotpoint Washing Machine draining problem, follow the below preventive measures.
Select the Correct Setting
Ensure that you select the correct setting for each load.
The Hotpoint washer has a setting that allows you to wash delicate items gently, which does not do the full spin cycle and may leave some water at the end of the wash.
Use a Laundry Bag for Small Items
Small clothing items can sometimes get lodged in the hose or the drain pump.
To prevent unnecessary clogging, collect all small items and put them in a pillowcase or a laundry bag before washing.
Regularly Clean the Coin Trap
The coin trap is a small plastic guard that covers the pump and is situated at the bottom of the machine in most models.
Regularly check and clean the coin trap to prevent any blockage.
Seek Professional Help
While DIY troubleshooting can be effective, some issues require a technician’s expertise. If you’ve tried the above steps without success, it might be time to call in the pros.
Final Words
Troubleshooting a Hotpoint washer that won’t drain is often a straightforward process. Still, it does require some patience and a bit of elbow grease.
Always remember to unplug your machine before you start tinkering around. And if all else fails, don’t hesitate to seek professional help.
With this guide, you should be well on your way to resolving any draining issues and getting back to hassle-free laundry days.
Crystal Hafley is a dedicated writer and content creator for WorstBrands, where she specializes in writing insightful reviews about kitchen appliances and fashion products.
With her expertise, Crystal provides readers with accurate and reliable information to help them make informed decisions about the brands and products they use every day. When she's not researching or writing, Crystal enjoys cooking and exploring the latest fashion trends.