There are few things as frustrating as a washing machine that refuses to spin. You end up with a pile of soaking wet clothes and a day’s plan gone haywire.
If you own a Hotpoint washer, you might have encountered the Hotpoint washing machine not spinning issue at least once.
But before you go into panic mode, I’m here to guide you through the common causes and solutions for a Hotpoint washer spinning problem. So grab your tools, and let’s dive in.
Table of Contents
- 5 Reasons Why Your Hotpoint Washer Won’t Spin
- 12 Ways to Troubleshoot Hotpoint Washing Machine Not Spinning
- 1. Incorrect Detergent
- 2. Imbalance Load
- 3. Defective Back Drum with Bearings
- 4. Low-Speed Wash Cycle
- 5. Malfunctioning Motor Control Board
- 6. Appliance Instability
- 7. Check for Inadequate Drainage
- 8. Faulty Motor Coupling
- 9. Damaged Rotor Assembly Magnet
- 10. Malfunctioning Door/Lid Switches
- 11. Unsteady Water Valve
- 12. Dysfunctional Washer Belt
- 13. Consult a Professional:
- Final Words
- Crystal Hafley
5 Reasons Why Your Hotpoint Washer Won’t Spin
There are various reasons why your Hotpoint washing machine may not be spinning. Some common causes include:
Uneven Load: Overloading the machine or not distributing the clothes evenly can cause an imbalance, preventing the washer from spinning.
Faulty Door Lock: The machine won’t start the spin cycle if your Hotpoint washer door is stuck or not locked properly.
Blocked Pump: A blockage in the pump will stop the machine from draining and subsequently spinning.
Worn-Out Motor Brushes: The motor brushes might be worn out, affecting the motor’s functioning.
Faulty Motor Control Board: The motor control board might be defective, hampering the motor function.
You might have also faced the draining issue; check out our blog on how to fix the Hotpoint washer won’t drain problem.
12 Ways to Troubleshoot Hotpoint Washing Machine Not Spinning
Fix a Hotpoint washer not spinning by checking the load, door lock, pump, motor brushes, and motor control board. Adjust, clean, replace parts, or seek professional help.
Now that we know some of the common reasons, let’s troubleshoot the Hotpoint Washer.
But before we dive into the details, here is a table that provides quick and easy fixes to the most common spinning problems of washers.
| Common Causes | Quick Fixes |
|---|---|
| Incorrect Detergent | Use HE detergents. |
| Imbalance Load | Replace the bearing and external drum. |
| Defective Back Drum/Bearings | Rearrange laundry to avoid overloading. |
| Low-Speed Wash Cycle | Select appropriate spin cycle. |
| Malfunctioning Motor Control Board | Replace burnt or defective components. |
| Appliance Instability | Adjust the washer feet or relocate the appliance. |
| Inadequate Drainage | Remove constrictions and replace faulty drain components. |
| Faulty Motor Coupling | Replace worn motor coupling. |
| Damaged Rotor Assembly Magnet | Replace damaged rotor components or magnets. |
| Malfunctioning Door/Lid Switches | Check continuity and change defective parts. |
| Unsteady Water Valve | Ensure the valve is firm; replace if necessary. |
| Dysfunctional Washer Belt | Replace if loose, weak, or stretched. |
If you have any other washer facing the same problem, read our blog on Fixing the Beko Washer not spinning or Troubleshooting the GE washer spinning issue.
1. Incorrect Detergent
First things first, let’s talk detergent. I can’t tell you how often I’ve seen people using the wrong type of detergent.
There are 2 main types: HE (high-efficiency) and non-HE. Non-HE detergents create more suds, leading to extra dampness in the wash load.
Easy Fix:
Always choose HE detergents for the HE Hotpoint washer to avoid this issue.
2. Imbalance Load
An uneven load is one of the most common reasons for a Hotpoint washer not spinning.
Hotpoint suggests redistributing the laundry evenly in the washer and not overloading the tub.
Some models might even stop spinning if they detect an imbalance.
Easy Fix:
You should ensure to rearrange the laundry uniformly. Overfilling the drum will lead to inadequate spinning.
3. Defective Back Drum with Bearings
The back drum of a washer includes a bearing or several bearings that maintain the inner drum rotating smoothly.
If the back drum malfunctions, your appliance becomes loud or stops spinning entirely.
Easy Fix:
To rectify this, you will probably have to change both the bearing and the external drum since manufacturers usually supply them as a set.
4. Low-Speed Wash Cycle
Pay attention to the spin cycles you choose. Fast-spin cycles are best for bulky loads, while slow-spin cycles are suitable for delicate clothes.
If you use a slow-spin cycle for a heavy load, your clothes will likely be dripping wet at the end of the wash.
Easy Fix:
Make sure you choose the correct spin cycle for your cleaning laundry.
5. Malfunctioning Motor Control Board
The motor control board provides power to the appliance. If it’s defective, the washer will struggle to work, let alone spin.
Easy Fix:
Check for any burnt components on the motor control board. If it’s defective, replace it.
6. Appliance Instability
A steady Hotpoint washer will revolve smoothly. However, something as trivial as unlevelled feet can disrupt the spinning.
In this situation, the instability will toss the garments out of equilibrium, resulting in a pile that retains more water.
Easy Fix:
To circumvent this, you should scrutinize the washer feet and modify them so your appliance is not unstable. If it remains unstable, think about relocating it to a different surface.
7. Check for Inadequate Drainage
Proper drainage is essential for spinning your garments dry. If the drainage is subpar, some water will be drawn back and remain stagnant in the tub.
My friend had the same problem when his Hotpoint washing machine was not spinning.
However, the machine worked fine when we removed the debris from the drain line.
Easy Fix:
To guarantee proper drainage, inspect for constrictions in the drain hose, incorrect drainpipe elevation, obstructed drain filter and drain hose, and a faulty drain pump.
8. Faulty Motor Coupling
The motor coupling links the motor and the washer’s transmission. It can deteriorate when there is an imbalanced load, a safety feature that shields the engine and transmission from harm.
Easy Fix:
If you observe indications of wear and tear on the motor coupling, I would advise changing it to fix your Hotpoint washer spinning problem.
9. Damaged Rotor Assembly Magnet
The rotor generates a potent electromagnetic field that enables the tub to rotate clockwise or anticlockwise.
If anything damages the rotor’s magnets or any of its inner components, it will result in the Hotpoint washer not spinning.
Easy Fix:
Check the rotor for faulty components or magnets and change them if necessary.
10. Malfunctioning Door/Lid Switches
The door or lid must lock properly for the washer to spin. The door lock or lid switch assembly might be faulty if they don’t lock.
Easy Fix:
Use a multimeter to check for continuity; if there’s none, replace the defective parts.
11. Unsteady Water Valve
Water dripping into the drum is more probable if the water inlet valve is unsteady, causing the washer to leak internally.
While a little dripping is not concerning, too much is worrisome.
Easy Fix:
Determine the water inlet valve is not unsteady. If it is firm but still has a problem with the spinning, contemplate changing the inlet valve.
12. Dysfunctional Washer Belt
Even if the washer belt can turn, it might not complete the spin if it’s loose, weak, or stretched.
Easy Fix:
Check the drive belt and replace it if needed.
13. Consult a Professional:
If all else fails, it might be best to consult a professional technician for further diagnosis and repair.
Final Words
While it can be frustrating when your Hotpoint washing machine is not spinning, identifying and addressing the cause can often resolve the issue.
I have outlined the common causes and troubleshooting steps to help you get your washer back up and running.
However, if you are not comfortable performing these steps yourself or if the problem persists, it is always advisable to consult a professional technician.
Crystal Hafley is a dedicated writer and content creator for WorstBrands, where she specializes in writing insightful reviews about kitchen appliances and fashion products.
With her expertise, Crystal provides readers with accurate and reliable information to help them make informed decisions about the brands and products they use every day. When she's not researching or writing, Crystal enjoys cooking and exploring the latest fashion trends.