Your Ford Explorer’s windshield molding does more than frame the glass—it seals out wind noise, prevents water leaks, and keeps the A-pillar looking sharp. Over time, sun exposure and road debris can crack or warp these trims, leaving your cabin noisier and your windshield vulnerable.
In this guide, we’ve compared nine top-rated A-pillar molding options for the 2011-2019 Explorer. Whether you need a quick driver-side fix or a full set, you’ll find the right balance of fit, durability, and value.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED “AS IS” AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Windshield Trim Molding A-Pillar Fit for 11-19 Ford Explorer BB5Z7803145AA
Best forFactory-curve perfect fit
- OE-spec curve
- 30-minute install
ConsiderDriver side only
CARMOCAR A-Pillar Front Molding Windshield Outer Trim Right (Passenger Side…
Best forPassenger side replacement
- Gloss black finish
- No tools needed
ConsiderUrethane recommended
CARMOCAR A-Pillar Front Molding Windshield Trim Left Outer & Inner Replacem…
Best forDriver outer and inner
- Outer and inner included
- Gloss black
ConsiderUrethane advised
A-Pillar Trim Molding Windshield Kit Compatible with 2011-2019 Ford Explore…
Best forComplete UV-resistant set
- Full set included
- UV-resistant finish
ConsiderMatte not gloss
HYR A-Pillar Windshield Trim Molding Set Fit for Ford Explorer 2011-2019, D…
Best forOE number compatibility
- Both sides included
- Direct fit
ConsiderNo inner trim
CARMOCAR Outer Windshield Pillar Trim Panel Molding Front Left (Driver Side…
Best forOuter driver trim only
- Gloss black
- Easy install
ConsiderSingle side
BASIKER A-Pillar Windshield Molding Trim Fit for Ford Explorer 2011-2019
Best forCurve-matched snug fit
- Upgraded radian
- Both sides
ConsiderNo inner trim
A-Pillar Molding Trim Kit with Clips Compatible with 2011-2019 Ford Explore…
Best forDriver side with clips
- Clips included
- UV-resistant
ConsiderDriver side only
A-Pillar Molding Trim Compatible with Ford Explorer 2011-2019
Best forOEM-matching reliability
- OEM design
- Both sides
ConsiderNo inner trim
Gledewen Windshield Trim Molding – Factory Fit Upgrade
The Gledewen A-pillar molding set is engineered to match the OE curve of your Explorer’s body, so you won’t have to force it into place. This upgraded design prevents the common problem of trims popping out after installation. It’s a direct fit for 2011-2019 Ford Explorers, and the included try-on testing ensures reliability.
Installation takes about 30 minutes, and you’ll appreciate the factory appearance it delivers. If you’re replacing a cracked driver-side trim, this set covers the BB5Z7803145AA and related part numbers. It’s a solid choice for restoring that seamless look.
- OE-spec curve
- 30-minute install
- Try-on tested
- Driver side only
- No inner trim
CARMOCAR Passenger Side Molding – Gloss Black Finish
This CARMOCAR trim is specifically for the passenger side of your Explorer, replacing part numbers like BB5Z-7803145-AA and BB5Z-7803137-AB. The gloss black finish matches the original look, and the ABS construction meets strict quality standards. You’ll find it easy to install without special tools.
It comes with side tape, but the manufacturer recommends adding urethane for extra security—a wise precaution for long-term durability. If you only need to replace the right-side molding, this is a straightforward, reliable option that won’t break the bank.
- Gloss black finish
- No tools needed
- ABS quality
- Urethane recommended
- Single side only
CARMOCAR Driver Side Outer & Inner – Complete Set
This CARMOCAR kit covers both the outer and inner trim for the driver side, saving you from buying separate pieces. It’s a direct fit for 2011-2019 Explorers, replacing 926-450 and multiple BB5Z part numbers. The gloss black finish and ABS build ensure durability.
Installation is simple, though the included side tape may need urethane reinforcement for maximum hold. If you’re addressing both the outer and inner pillars on the left side, this combo offers convenience and consistency in appearance.
- Outer and inner included
- Gloss black
- Easy install
- Urethane advised
- Left side only
BELKEBIR A-Pillar Trim Kit – UV-Resistant Durability
The BELKEBIR kit includes both driver and passenger side trims, outer and inner, making it a complete solution. It’s made from high-quality ABS plastic with a UV-resistant matte black finish, so it won’t fade or crack under harsh sun. The pre-installed clips and mounting tape allow for a hassle-free snap-on installation.
Beyond aesthetics, this molding seals the windshield edge, reducing wind noise and protecting against moisture. If you want a full set that’s built to last, this is a strong contender.
- Full set included
- UV-resistant finish
- Pre-installed clips
- Matte not gloss
- May need extra tape
HYR A-Pillar Trim Set – OE Number Coverage
HYR’s set covers both sides, with driver-side replacements for 926-450 and passenger-side for 926-451, along with several BB5Z numbers. This makes it easy to verify compatibility before you buy. The direct-fit design uses existing mounting points, so no modifications or special tools are needed.
Whether you’re replacing one side or both, this kit provides a straightforward solution. The ABS material is durable, and the installation is quick enough for a weekend DIY project.
- Both sides included
- Direct fit
- No special tools
- No inner trim
- Basic finish
CARMOCAR Outer Driver Trim – Simple Swap
This CARMOCAR trim is for the outer driver side pillar, replacing parts like BB5Z-7803145-AA and BB5Z-7803137-AB. The gloss black finish matches the factory look, and the ABS construction ensures it holds up. Installation is easy, with no special tools required.
It includes side tape, but you might want to add urethane for extra security. If you only need to replace the outer trim on the left side, this is a budget-friendly, no-fuss option.
- Gloss black
- Easy install
- Budget-friendly
- Single side
- Urethane recommended
BASIKER A-Pillar Molding – Upgraded Radian Fit
BASIKER’s molding set is designed with an upgraded radian that matches the original body curve, ensuring a snug fit without gaps. It’s compatible with 2011-2019 Explorers and replaces common OE numbers on both sides. The high-quality ABS material is built to last.
Installation is direct-fit, requiring no special tools. If you’ve had issues with trims popping out, this curve-matched design could be the solution you need.
- Upgraded radian
- Both sides
- OEM standard
- No inner trim
- Limited color options
BELKEBIR Driver Side Kit – Clips Included
This BELKEBIR kit focuses on the driver side outer trim, with pre-installed clips and mounting tape for a secure fit. It’s a direct replacement for OE# 926450 and BB5Z-7803137-AA, among others. The UV-resistant matte black finish resists fading and warping.
Installation is hassle-free—just remove the old trim and snap the new one in. It also helps seal the windshield edge, reducing noise. If you need a reliable driver-side replacement, this is a solid pick.
- Clips included
- UV-resistant
- Easy snap-on
- Driver side only
- Matte finish
FEXON A-Pillar Trim – OEM Design Reliability
FEXON’s trim is designed to meet or exceed OEM standards, using quality materials and advanced technology. It’s compatible with 2011-2019 Explorers and replaces both left and right part numbers. This isn’t just decorative—it helps protect the windshield edge from damage.
The direct-fit design ensures a clean installation. If you’re looking for a dependable replacement that matches factory quality, FEXON delivers.
- OEM design
- Both sides
- Quality materials
- No inner trim
- Basic finish
Buyer’s Guide: What to Consider
Choosing the right windshield molding for your Ford Explorer involves more than just picking a part. Consider fitment, material, and what’s included to ensure a lasting repair. Here are key factors to guide your decision.
- Fitment and Compatibility: Always verify your Explorer's year and side (driver or passenger) against the product's OE numbers. Most trims list compatible part numbers like 926-450 or BB5Z-7803145-AA. A direct-fit part saves time and avoids gaps.
- Material and Finish: ABS plastic is standard, but look for UV-resistant finishes to prevent fading and cracking. Gloss black matches factory shine, while matte black offers a subtle look. Choose based on your preference and climate.
- Installation Ease: Most trims come with pre-installed clips or tape, allowing a simple snap-on installation. Some manufacturers recommend urethane adhesive for extra security. Consider your DIY skill level and whether you have the tools.
- Included Components: Some kits include both outer and inner trims, while others are single-side. If you need to replace multiple pieces, a full set can save money and ensure consistent appearance. Check the product description carefully.
- Durability and Warranty: High-quality ABS resists warping and cracking, but check for any warranty or guarantee. Reading customer reviews can reveal long-term performance. A slightly higher price for durability is often worth it.
Conclusion
Replacing your Explorer’s windshield molding is a straightforward way to restore protection and appearance. Whether you need a single side or a full set, the options above cover various needs, from budget-friendly to feature-rich.
For most drivers, the BELKEBIR full set offers the best balance of durability and coverage. If you prefer a factory-curve fit, the Gledewen is an excellent choice. Verify your vehicle’s details and install with confidence.
Erica Steven is the founder and lead writer of WorstBrands, a site dedicated to providing honest and trustworthy reviews about outdoor gear and fashion products.
With a passion for exploring the great outdoors and staying up to date on the latest fashion trends, Erica uses her expertise to provide valuable insights into the products that matter most to her readers.
Whether you're looking for camping equipment or the latest fashion accessories, Erica's articles are the perfect resource for finding the best products that fit your lifestyle.