Wet filament is a silent killer of 3D prints. It causes stringing, bubbling, poor layer adhesion, and frustrating clogs. If you have ever watched a perfect print fail halfway through, moisture is likely the culprit. A filament dryer removes absorbed water from your spools, restoring them to peak performance and ensuring consistent, high-quality results.
This guide reviews the top filament dryers on the market, from compact single-spool units to large multi-spool stations. You will learn about heating technology, capacity, ease of use, and storage features, helping you choose the right dryer for your workflow and budget.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED “AS IS” AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Creality Filament Dryer Box 4 Spools, Space Pi X4 Filament Storage Box, 200…
Best forHigh-volume multi-spool drying
- Dries four spools at once
- Fast 200W PTC heating
ConsiderLarge footprint
Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keepin…
Best forBudget-friendly basic drying
- Holds two spools
- Simple temperature controls
ConsiderLimited temperature range
SUNLU Official Filament Dryer S2, for PLA PETG ABS Filament, Black
Best forCompact touchscreen drying
- 360° circular heating
- Large touchscreen display
ConsiderSingle spool capacity
SUNLU S4 3D Printer Filament Dryer, Black
Best forMulti-printer print farms
- Dries four spools at once
- Eight filament outlets
ConsiderTakes up desk space
Polymaker Filament Dryer & Storage Box Polydryer for 1kg PA Nylon PLA PETG
Best forSealed storage and drying
- Sealed storage prevents re-absorption
- Built-in humidity monitoring
ConsiderSingle spool capacity
SUNLU Filament Dryer Box 2026 New Upgrade S1 Plus, Black
Best forQuick drying with fan
- Built-in fan speeds drying
- Clear LCD display
ConsiderLower max temperature
2026 New Official CREALITY Space Pi Filament Dryer Plus, 2 Spools Double 36…
Best forDual-spool drying with touchscreen
- Dries two spools with 360° heat
- One-key settings for 12 filaments
ConsiderOnly two spool capacity
Creality 2026 New Upgrade Filament Dryer Box Pro, Space Pi SE with High PTC…
Best forSimple single-spool precision drying
- 360° even heating
- No assembly required
ConsiderSingle spool capacity
SUNLU S4 3D Printer Filament Dryer, 4 Spools Capacity, Black
Best forEven drying for multiple spools
- Three circulation fans for even heat
- 350W PTC heater is efficient
ConsiderLarge footprint
Sovol Filament Dryer, SH02 Dry Box Filament Sealed Storage Box 3D Printer S…
Best forDual spool drying with touchscreen
- Fast 150W PTC heating
- Better sealing than previous model
ConsiderOnly two spool capacity
Creality Space Pi X4 – High-Capacity Dual-Chamber Dryer
The Creality Space Pi X4 is built for high-volume users who need to dry multiple spools at once. It holds four standard 1kg spools or two large 2kg spools, making it a true workhorse. The dual independent 200W heating chambers reach up to 85°C, removing moisture 30% faster than single-chamber dryers. This speed is a game-changer when you are in the middle of a project and need dry filament quickly.
Beyond drying, this unit doubles as a storage box. The silicone-sealed enclosure actively maintains humidity during printing pauses, preventing re-absorption. The industry-first drying scene touch UI lets you customize settings with ease. If you run multiple printers or print frequently, this dryer saves time and ensures your filament stays in top condition.
- Dries four spools at once
- Fast 200W PTC heating
- Sealed storage prevents re-absorption
- Large footprint
- Premium price
Comgrow Filament Dryer Box – Budget-Friendly Two-Spool Dryer
The Comgrow Filament Dryer Box is an affordable entry point for keeping your filament dry. It holds two 1kg spools, with an inner size of 9.29 by 6.49 by 9.13 inches, fitting standard PLA, ABS, and silk filaments. The adjustable temperature range of 40° to 50°C is suitable for most common materials, and the real-time temperature and humidity display helps you monitor conditions.
Setting it up is straightforward: turn it on, choose your temperature and duration, and let it work. The internal heating during printing keeps moisture at bay, preventing common issues like stringing and poor adhesion. While it lacks advanced features like touchscreens or high-temperature drying for engineering materials, it is a reliable, budget-conscious choice for hobbyists who mainly print PLA and PETG.
- Holds two spools
- Simple temperature controls
- Real-time humidity display
- Limited temperature range
- No touchscreen
SUNLU S2 Filament Dryer – Compact 360° Heating
The SUNLU S2 is a compact filament dryer that uses 360° circular heating to tackle moisture from all angles. Dual heating sheets ensure even heat distribution, solving stringing, clogging, and poor adhesion caused by wet filament. You can set the temperature up to 70°C, which is ideal for quick drying of PLA, PETG, and ABS.
The 4.6-inch LCD touch screen is a standout feature, clearly showing temperature, time, humidity, filament type, and countdown. The intelligent temperature control system adjusts automatically for optimal results. With a maximum filament holder size of 210 by 85mm, it fits most standard spools. If you want a user-friendly dryer with precise control, the S2 is a strong contender.
- 360° circular heating
- Large touchscreen display
- Adjustable up to 70°C
- Single spool capacity
- Smaller internal size
SUNLU S4 Filament Dryer – Four-Spool Efficiency
The SUNLU S4 is a large-capacity dryer designed to handle up to four 1kg spools simultaneously. Its external dimensions of 460 by 220 by 310mm and internal space of 450 by 175 by 207mm accommodate multiple spools with ease. The 350W PTC heater provides fast, safe heating, and the eight filament exit holes allow you to feed multiple printers at once, making it perfect for a small print farm.
Drying while printing is a breeze, as the S4 maintains low humidity throughout your print job. The large size means you can dry a full batch of filament overnight and have it ready for the next day. If you have multiple printers or print frequently, the S4 streamlines your workflow and ensures consistent quality across all your prints.
- Dries four spools at once
- Eight filament outlets
- 350W PTC heater for fast drying
- Takes up desk space
- Heavier unit
Polymaker Polydryer – Dry, Store, and Print Seamlessly
Brand: Polymaker
Perfect for makers who prioritize long-term filament preservation.
The Polymaker Polydryer is a unique solution that combines drying and storage in one sealed system. It is designed to keep filament in better condition, reducing moisture-related print failures. The built-in humidity control and monitoring let you track conditions, ensuring your filament stays dry even during long printing sessions.
You can move from drying to sealed storage and direct printing without breaking the seal, which is a huge advantage for maintaining filament quality over time. It is compatible with a wide range of filament types and sizes, including PA nylon, PLA, and PETG. If you value long-term storage and consistent performance, the Polydryer is a smart investment.
- Sealed storage prevents re-absorption
- Built-in humidity monitoring
- Works with PA, PLA, PETG
- Single spool capacity
- No touchscreen
SUNLU S1 Plus – Fast Drying with Fan
The SUNLU S1 Plus is an upgraded version of the popular S1, featuring a built-in fan that accelerates drying. The fan circulates air, reducing drying time and improving efficiency. The 2-inch LCD screen displays temperature, time, and humidity, and you can adjust settings with simple button controls.
Temperature is adjustable from 35°C to 55°C, which suits most common filaments. The maximum capacity is 210 by 89mm, fitting standard spools. This dryer is a great choice if you want a simple, effective way to keep filament dry without extra frills. It is particularly good for PLA and PETG users who need quick turnaround times.
- Built-in fan speeds drying
- Clear LCD display
- Adjustable temperature range
- Lower max temperature
- No touchscreen
Creality Space Pi Plus – Double 360° Heating
The Creality Space Pi Plus is a two-spool dryer with double 360° hot-air heating. It uses two 160W PTC heaters with a built-in fan to circulate hot air evenly, ensuring consistent drying across both spools. The 4-inch LCD touch screen makes it easy to navigate, and the one-key setting for 12 filament types simplifies operation.
It comes with four filament holes and two PTFE pipes, allowing you to feed two printers simultaneously. The compatibility is broad, supporting 99% of FDM filaments and multiple diameters. If you print with two different materials or want to dry two spools at once, this dryer offers excellent flexibility and performance.
- Dries two spools with 360° heat
- One-key settings for 12 filaments
- Four filament holes for dual printing
- Only two spool capacity
- 160W heating may be slower
Creality Space Pi SE – Precision Drying for 1KG Spools
The Creality Space Pi SE is a compact dryer designed for 1kg spools. It features an upgraded PTC heating system with a built-in fan that circulates hot air 360° for even heat distribution. The temperature range of 45° to 65°C is ideal for PLA, PETG, ABS, and ASA, and the precision sensor ensures accurate control.
This dryer is easy to use right out of the box, with no assembly required. The display screen and knob make operation simple, and real-time humidity monitoring keeps you informed. It effectively solves problems like drawing, stringing, and poor adhesion. If you want a straightforward, reliable dryer for your most-used filaments, the Space Pi SE is a great pick.
- 360° even heating
- No assembly required
- Real-time humidity monitoring
- Single spool capacity
- Limited temperature range
SUNLU S4 with Circulation Fans – Enhanced Even Drying
Brand: SUNLU
Excellent for users who need consistent drying across many spools.
This version of the SUNLU S4 adds three circulation fans to ensure consistent temperature across the entire chamber. The 350W PTC heater provides 50% more heating efficiency than the S2, and the 360° surround heating guarantees even drying for all four spools. This is a significant upgrade for users who need uniform results.
With eight filament exit holes, you can run multiple printers or route filament from different angles. The large internal dimensions accommodate four 1kg spools comfortably. If you have a print farm or print multiple materials, this dryer delivers reliable, even drying that reduces waste and improves print quality.
- Three circulation fans for even heat
- 350W PTC heater is efficient
- Eight filament outlets
- Large footprint
- Higher power consumption
Sovol SH02 – Dual Spool Dryer with Touch Screen
The Sovol SH02 is a dual-spool filament dryer with a modern touch screen interface. It features a 150W PTC heater that reaches 50°C in just 7 minutes, saving you time. The improved sealing design uses thicker materials to keep moisture out, even when the dryer is not in use.
It has two filament holes for PTFE pipes, allowing you to feed two printers or dry two spools simultaneously. The one-key setting for 9 different filament types simplifies setup, and the touch screen makes adjustments easy. If you want a compact, efficient dryer with intuitive controls, the SH02 is a strong option.
- Fast 150W PTC heating
- Better sealing than previous model
- One-key settings for 9 filaments
- Only two spool capacity
- Lower max temperature
Buyer’s Guide: What to Consider
Choosing the right filament dryer depends on your printing habits, the materials you use, and your budget. This guide covers key factors to consider, from capacity and heating technology to ease of use and storage features, helping you make an informed decision.
- Capacity: Consider how many spools you typically use or need to dry at once. Single-spool dryers are compact and affordable, while multi-spool models like the SUNLU S4 or Creality Space Pi X4 save time for high-volume users.
- Heating Technology: PTC heaters are common and efficient. Look for features like 360° hot-air circulation or multiple fans to ensure even drying. Higher wattage usually means faster heating, but also higher energy use.
- Temperature Range: Different filaments require different drying temperatures. PLA and PETG need around 40-55°C, while nylon and PC may need up to 70-85°C. Choose a dryer that covers the materials you print with.
- Ease of Use: Touchscreens, one-key presets, and clear displays make operation simpler. Some dryers offer real-time humidity monitoring, which helps you know when your filament is dry. Consider how much control you want over settings.
- Storage and Sealing: A dryer that doubles as a sealed storage box prevents re-absorption of moisture after drying. Look for silicone seals and good insulation. This is especially important if you live in humid climates or print infrequently.
Conclusion
Keeping your filament dry is essential for high-quality 3D prints. The dryers reviewed here range from budget-friendly single-spool models to high-capacity multi-spool systems, each with unique strengths. Whether you are a hobbyist or a professional, there is a dryer that fits your needs.
For most users, the SUNLU S4 offers excellent value with its four-spool capacity and efficient heating. If you need maximum speed and storage, the Creality Space Pi X4 is a top choice. For those on a budget, the Comgrow dryer is a reliable entry point. Evaluate your workflow and pick the dryer that best matches your printing demands.
Erica Steven is the founder and lead writer of WorstBrands, a site dedicated to providing honest and trustworthy reviews about outdoor gear and fashion products.
With a passion for exploring the great outdoors and staying up to date on the latest fashion trends, Erica uses her expertise to provide valuable insights into the products that matter most to her readers.
Whether you're looking for camping equipment or the latest fashion accessories, Erica's articles are the perfect resource for finding the best products that fit your lifestyle.